Locksmithing

Locks, gates and railings, automation and welding.

Locksmithing
Door entry system or video door entry for a community: what the installation involves

Replacing a building's door entry system with video door entry means cabling, an outdoor panel and monitors in each flat. What to quote.

27 July 20261 min read
Locksmithing
Fixed window grille: what measurements and regulations must be respected

A fixed window grille has to meet bar-spacing requirements and, in some cases, emergency-exit requirements. What to check before installing it.

27 July 20261 min read
Locksmithing
Metal shutter for a commercial premises: the most common faults and their cost

Steel shutters on commercial premises suffer different wear from a domestic blind. Which faults are most frequent and what they cost.

27 July 20261 min read
Locksmithing
Extra bolt or deadbolt: how to reinforce a door without replacing it entirely

You don't always need to replace the whole door to improve security. Which additional reinforcements are a cheap and effective alternative.

27 July 20261 min read
Locksmithing
Sliding or swing gate motor: differences in installation and power

The type of gate determines the motor and the civil work needed to automate it. Differences between a sliding and a swing gate motor.

27 July 20261 min read
Locksmithing
Duplicating security keys: why it costs more than a normal key

Keys for high-security cylinders can't be copied at just any hardware shop. Why the process is different and what to include in the quote.

27 July 20261 min read
Locksmithing
How much does a locksmith charge per hour and for an emergency call-out?

Guideline locksmithing rates in normal hours and for emergencies, and why the price of opening a door varies so much between professionals.

27 July 20261 min read
Locksmithing
Locksmith or glazier? Who to call depending on the problem

Many clients are unsure who to call when there's a problem with a door or window that has glass and metal fittings. How to tell.

27 July 20261 min read
Locksmithing
Workshop locksmith or installer: what work is done in each phase

Fabricating a metal structure and installing it on site are different phases of locksmith work. How the quote is organised between the two.

27 July 20261 min read